Dial bore gage is useful equipment which is used to quickly and accurately measure the dimensions of bore, such as out-of-round, inside diameter, and taper. The dial bore gage should be calibrated to a recognized size and it will indicate the deviation from that size by a maximum of 1mm. This gage is commonly calibrated in 0.001″ or 0.0001″.
Dial bore gage is equipped with three symmetrical anvils which protrude from the gauge body that are connected to the dial or micrometer mechanism. When the knob is rotated, it moves the anvils in or out with respect to the measurements. The knob generally has a slipping mechanism to take the feel out of the device and increase reliability between measurements. This dial bore gage is useful in checking for taper or out-of-round conditions in a cylinder bore as well as many other inside machinists measurements.
If you find difficulty to meet the right dial bore gage that comes with your requirements, these are going to give you some information that will help you choose the item you are searching for. Just take a look at the following information and find what this equipment can offer you.
Dial Bore Gage by Tresna
The first option of dial bore gage is delivered by Tresna. This gage is a special purpose dial indicator for checking bores. This gage consists of a dial indicator at one end of a long stalk and a tripod arrangement positioned 90°to the stalk at the other end. The tripod is made up of a single interchangeable post that goes against one side of the bore being checked and two hardened buttons at the other end that automatically center the plunger in the bore. The gauge plunger is between the two buttons, directly opposite the post. To allow for different bore sizes, the post is interchangeable. This allows you to measure the big end of a connecting rod or the diameter of a cylinder bore.
Mitutoyo Dial Bore Gages- Split-Ball Type
The second option of dial bore gage comes from Mitutoyo. Mitutoyo is known as one of the most popular brands available on the market today. This split-ball type of bore gage measures diameters of small holes. The radius displacement of split-ball contact is converted to axial displacement of measuring pin, which is shown on the dial indicator. The Digimatic indicator can be installed in place of the dial indicator.
The other option of dial bore gage from Mitutoyo is the Series 511. This is interchangeable anvils and necessary accessories to perform close tolerance I.D. measurements. It comes with carbide ball contact point for durability. The optional extension rods can be attached. The Digimatic indicator can also be attached in place of the dial gage. This gage has 0.0002″/5µm of accuracy.
Dial Bore Gages by Geneva Gage
The next option of dial bore gage is presented by Geneva Gage. This gage is made for close tolerance measurements of holes, taper, roundness. The features of this gage include self-centering, radius contacts hardened and precision ground, extensions and washers for fine adjust a specific range. It is supplied with AGD group 2 dial indicator. This gage is available in smaller and larger ranges available.
Comments on this entry are closed.